by Bob Warfield | Dec 7, 2021 | Blog, CNC Manufacturing & Job Shops, Feeds and Speeds, GCode, Software, Tools and Techniques
Did you make some New Year’s Resolutions this year? You really should. 2022 is going to be a growth year for CNC. Right here at the beginning is your chance to take on some new challenges and learn some new things that will help ensure you grow too...
Details
by Bob Warfield | Aug 28, 2021 | Blog, CNC Basics, CNC Manufacturing & Job Shops, Feeds and Speeds, Software, Tools and Techniques
Optimize Depth of Cut and Stepover for Better CNC Milling Note: This is Lesson 5 of our Free Email Feeds & Speeds Master Class. Click here to learn more about the Master Class. Cutting Speed, Feed Rate, Stepover, and Depth of Cut. Before you can...
Details
by Bob Warfield | Aug 10, 2021 | Blog, CADCAM, CNC Projects, Software
For those curious about using a program like Rhino3D, this is a quick walkthrough of how I changed my original steam port design to a fancier version. Instead of drilling at a steep angle to keep the ports near the end of the cylinder, I change the design to use a...
Details
by Bob Warfield | Jul 26, 2021 | Blog, CADCAM, CNC Basics, Quoting and Estimating, Software, Tools and Techniques
CAM Toolpaths and Operations have a lot in common with sculpture CAM Programming is the process of using CAM Toolpaths and Operations to set your part free from the block of material it resides in. When asked about his statue of David, Michelangelo said, “I saw...
Details
by Bob Warfield | Jul 20, 2021 | Blog, CNC Basics, GCode, Software, Tools and Techniques
Beginner’s Guide to Using Conversational CNC to Program CNC Parts Deliverable: A G-Code Part Program created using Conversational CNC. Conversational CNC is programming g-code by asking questions of the programmer in order to create operations that are similar...
Details
by Bob Warfield | Jul 10, 2021 | Blog, GCode, Software
Macro Example: G-Code Engraving Digits CNCCookbook’s G-Code Tutorial A Set of Macros for Engraving Digits In this example, we’ll show how to create a set of macros for engraving digits. To start out, I wanted to create a “stick font” for the...
Details
1 Comment