I just uploaded G-Wizard Editor version 1.018, which has our new Conversational CNC Face Milling and Surfacing Wizard.  Here’s what it looks like:

Face Milling and Surfacing CNC WizardThe Surfacing Wizard includes three different toolpaths:

–  Zig-zag:  Fastest surfacing, because it cuts both ways.

–  Climb Mill:  Best surface finish–passes are climb mill and then rapid back so they always cut in the same direction.

–  Radial:  This path spirals outward, and is a nice compromise between the two as well as a good choice for surfacing round areas.

We’ve spent a lot of time incorporating state-of-the-art face milling toolpath features, such as the way the tool arcs into the workpiece.  These features result in longer tool life, particularly when surfacing tough materials, as well as better surface finishes.  You can get a PhD in Face Milling and write your own programs to do this stuff or just use the Surfacing Wizard.  While there are other Wizards and Conversational CNC programs out there, G-Wizard is the first one I’ve seen that does this sort of thing.  Even many CAM packages don’t.

I made a video that shows how to use the Wizard if you want more information:

[youtube]http://www.youtube.com/watch?v=FkoSToFGmIQ[/youtube]

Also, if you’ve never tried G-Wizard Editor, check it out.  We offer a free 30-day trial.  If you were in the original Beta test and want to try it again, drop me a note.  I’ll give you another trial.

 

Like what you read on CNCCookbook?

Join 100,000+ CNC'ers!  Get our latest blog posts delivered straight to your email inbox once a week for free. Plus, we’ll give you access to some great CNC reference materials including:

  • Our Big List of over 200 CNC Tips and Techniques
  • Our Free GCode Programming Basics Course
  • And more!

Just enter your name and email address below:

Full Name
Email *
100% Privacy: We will never Spam you!