by Bob Warfield | Blog, CNC Manufacturing & Job Shops, Feeds and Speeds, Software, Tools and Techniques
What is cutting force? Cutting force is the resistance of the material being cut against the intrusion of the cutting tool. The force directions and strengths can vary based on the different machining process such as turning, milling, drilling and so on. Cutting...
Details
![G49 G-Code [Tool Length Compensation Cancel]](https://www.cnccookbook.com/wp-content/uploads/2023/04/img_6446c2d5a33bd.png)
by Bob Warfield | Blog, GCode, Software, Tools and Techniques
Note: This article is part of CNCCookbook’s G-Code Tutorial. What does the G49 CNC Code do? The G49 g code cancels tool length compensation. You can turn it back on again using the “H” word on a G43 or G44 g code. What is Tool Length...
Details
![CNCCookbook 2023 CAD Survey [ Market Share, Customer Satisfaction ]](https://www.cnccookbook.com/wp-content/uploads/2023/04/img_643ebcf902e51-1080x675.png)
by Bob Warfield | Blog, CADCAM, CNC Basics, Software, Tools and Techniques
It’s time to present the results of the CNCCookbook 2023 CAD Survey! There were not quite 400 responses to our question about production CAD packages. Thank you all very much for participating! We have CAD Survey data for 2013, 2015, 2016, 2017, 2018, 2019, 2020...
Details
by Bob Warfield | Blog, CADCAM, Software
Folks, it’s once again time for our annual CAD (and CAM will follow right after) market survey. These surveys provide unique information that you simply can’t get anywhere else, so please take a minute to participate: Take Our CAD Survey Thanks in...
Details
![Countersink Depth Calculator [ Free Machinist Tool ]](https://www.cnccookbook.com/wp-content/uploads/2023/02/img_63f4ff227127d-1080x675.png)
by Bob Warfield | Blog, Software, Tools and Techniques
Countersink Depth Calculator G-Wizard has a free Countersink Calculator: It is accessed via the Geometry tab, and it is free to anyone who has ever had a free 30 day trial or subscription to G-Wizard. Use this handy countersink calculator to determine what depth to...
Details
![CNC Router Software: Easy Guide [ Beginner to Advanced ]](https://www.cnccookbook.com/wp-content/uploads/2022/10/img_635976e28def5.png)
by Bob Warfield | Blog, CADCAM, CNC Basics, CNC Router, Feeds and Speeds, GCode, Software, Tools and Techniques
Introduction This article will walk you through the basic types of software for CNC Routers. Most folks will not use all of the cnc software described here. But it’s good to know what is out there in case you do have a problem one of these cnc software packages...
Details
by Bob Warfield | Blog, Software, Tools and Techniques
What is a Co-Ax Indicator? It’s a common problem for a machinist to need to find the center of a circular feature–either a boss or a hole. There are a lot of ways to do this ranging from using a probe on a CNC to using one of the many tried-and-true...
Details
![How much does a CNC Machine Cost? [Complete Guide]](https://www.cnccookbook.com/wp-content/uploads/2022/08/img_630ceeadc8c01.png)
by Bob Warfield | Blog, CADCAM, CNC Basics, CNC Manufacturing & Job Shops, CNC Router, DIY CNC, Software, Tools and Techniques
There are literally thousands of CNC machines available in the world’s markets, and they’re aimed at a huge variety of different audiences. These audiences range from Hobbyists through large scale Aerospace Manufacturers that demand the very best CNC...
Details
by Bob Warfield | Blog, CADCAM, GCode, Software, Tools and Techniques
What is an NC Viewer? An NC Viewer is a software tool that helps you work with your cnc machine’s nc files. NC files, also called g-code files, are the files that tell your cnc machine how to make parts, so this is pretty important. NC Viewers go by many names...
Details
![Thread Calculator [ Comprehensive Awesome Software ]](https://www.cnccookbook.com/wp-content/uploads/2019/08/img_5d51ccea5b13e.png)
by Bob Warfield | Blog, CNC Manufacturing & Job Shops, Software, Tools and Techniques
Thread Calculator [ Comprehensive Awesome Software ] Have you had a chance to try our new Thread Calculator? G-Wizard Thread Calculator is a premium add-on module for G-Wizard Calculator. There’s a special sale running during these final stages of Beta Test...
Details
by Bob Warfield | Blog, Feeds and Speeds, Software, Tools and Techniques
Many machinists, especially brand new and hobby machinists, probably think performance and tool life don’t go hand in hand. You choose one or the other and let the chips fall where they may (sorry!). But it turns out that there is actually a middle...
Details
by Bob Warfield | Blog, Software, Tools and Techniques
First question you might like to answer is, “What the heck is a Cut Knowledge Base?” Simply put, a Cut Knowledge Base (hereafter referred to as a “Cut KB”) is a way of organizing your notes about what worked and what didn’t to make it...
Details
0 Comments 