%
O0000
N10 (MACH3 MILL - )
N20 (AUTHOR - {SCOTT SHAFER})
N30 (GROUP - TOOLPATH GROUP #1)
N40 (SYSTEM- ONECNC-XR3 MILL 3D ADVANTAGE - VERSION 11.30)
N50 (NOTES - NONE)
N60 G0 G40 G49 G50 G80 G94
N70 (0.5INCH END MILL ) ( )
N80 T0 M06 G43 H0
N90 S1600.0 F25.0 M3 M07
N100 G4 P3
N110 G00 X-0.1211 Y0.65 Z0.2
N120 Z0.05
N130 G01 Z-0.8 F12.5
N140 Y0.45 F25.0
N150 G03 X0.0789 Y0.25 I0.2 J0.
N160 G01 X4.
N170 G02 X4.25 Y0. I0. J-0.25
N180 G01 Y-1.9978
N190 G02 X4.25 Y-1.9999 I-0.6286 J-0.0021
N200 X3.6214 Y-2.6285 I-0.6286 J0.
N210 X2.9928 Y-1.9999 I0. J0.6286
N220 X2.993 Y-1.9847 I0.6286 J0.
N230 G01 Y-1.7789
N240 Y-1.75
N250 G02 X2.9925 Y-1.75 I-0.0005 J0.25
N260 G01 X1.0204
N270 G02 X1.0076 Y-1.7497 I0. J0.25
N280 G03 X1.007 Y-1.7503 I0. J-0.0006
N290 G02 X1.007 Y-1.7548 I-0.25 J-0.0045
N300 G01 Y-1.9633
N310 G02 X1.008 Y-1.9995 I-0.628 J-0.0361
N320 X0.379 Y-2.6285 I-0.629 J0.
N330 X-0.25 Y-2.0004 I0. J0.629
N340 X-0.25 Y-2. I0.25 J0.0004
N350 G01 Y0.
N360 G02 X0. Y0.25 I0.25 J0.
N370 G01 X0.0789
N380 X0.1136 Y0.447
N390 G00 Z0.2
N400 M05 M09
N410 (END TOOL)
N420 M05 M09
N430 M30
%