G-Wizard G-Code Editor (GWE) Change
Log and Release Notes
A log of what
changed with each new version from newest to oldest. Remember, G-Wizard
tells you when you need to upgrade with a message in the top right corner
of the screen. If you need the latest version, it can be installed from this page. Updates to this page are generally only made on the more major releases.
2/8/17: Release 2.79
- Fixed a long-standing bug that sometimes caused random lines to be drawn in the backplot if you switched views during simulator runs.
- Improved sync between line numbers and text during scrolling.
- Improved performance on large files. More to come!
- Added checking for Infinite values being assigned to words as a result of macro expressions. These were hard to find and could cause all sorts of odd problems. Now you get warning messages.
1/20/17: Release 2.76
- Reverted to using AIR 23 instead of AIR 24. AIR 24 causes video driver problems that result in GWE just displaying a blank white screen with a blank black area for the backplot. See our Troubleshooting page for how to get to AIR 23.
- Fixed a problem that prevented axis multipliers in the Post from working.
- Fixed the message that says the Conversational Wizard was not implemented when it really just had issues with the parameters that were entered.
- Fixed some problems that made it hard to add new G and M-Codes to a post.
1/17/17: Release 2.73
- Improved support for very large files. Am now able to load an 80MB file without it hanging.
- Added an option to use software rendering without gpu acceleration since there's beena rash of video card driver issues lately. Just add the file "GWESoftwareRender.txt" into your "My Documents" folder (or the Mac equivalent). It doesn't matter what's in the file so long as it exists.
- Added the ability to create new G-Codes with fractional names (e.g. G38.1) in the post file. This is used for the GRBL post.
- Added a GRBL post and made it the default for Shapeoko and Carbide3D Nomad machine profiles.
12/28/16: Release 2.72
- Fixed a bug where having M98 call a non-existent "O" code gave an erroneous macro infinite loop warning instead of telling you the O code didn't exist.
- Fixed a bug where assignments of the form #100=0 were not being processed correctly unless there were more non-whitespace characters following the last character.
12/1/16: Release 2.70
- Bug fixes to G71 lathe canned cycle.
9/25/16: Release 2.66
- Getting Started Tours
9/24/16: Release 2.64
- Social Logins
8/8/16: Release 2.62
Release 2.62 has significant improvements to Zoom Extents and scrolling on the Hints page to improve usability.
7/6/16: Release 2.61
Release 2.61 fixes a problem for Fanuc and Mach3 mill posts that did not recognize G71 as metric.
5/24/16: Release 2.60
Release 2.60 is focused on:
- Further G76 refinements
- New OD Threading Conversational CNC Wizard
- Fixed a bug in Conversational CNC ID Turn Wizard--retract was dragging a bit.
4/26/16: Release 2.57 (Minor)
Release 2.57 is focused on G76 threading cycle enhancements with support for Fanuc two and one line, Haas, LinuxCNC, and Mach3 syntaxes plus tons of hints..
3/29/16: Release 2.51 (Minor)
Release 2.50 includes.
- G76 Threading Cycle for lathes is available. In this version, only the 2 line version for Fanucis set by default. You can access the other versions on the post variables.
- Fixed a bug where the Post files were not being kept in the shared folder as they should have been. This could lead to changes in the Post not being shared.
3/9/16: Release 2.50 (Minor)
Release 2.50 includes.
- Implemented new "Gen Crib" feature on the Tools tab. It will create a new Tool Table in the Tool Crib based on tools referenced in the Tools tab.
- Improved the Macros tab so up to date variable values are displayed at all times (no more need to run debugger) and you can change the variable values.
- Added the ability to change the rapids color.
- Improved the handling of LinuxCNC '<variable>' syntax.
- Fixed a problem that made the divider between the backplot and the debugger info window jump around too much.
- Fixed a problem in Bulk Find/Replace.
- Fixed a problem that could hang GWE when changing posts.
2/24/16: Release 2.48 (Minor)
Release 2.48 includes:
- Improved formatting on all lathe Conversational Wizards.
- Fixed a bug that prevented the Crib Wizard from working.
- Fixed some problems with custom code snippets.
- Switched to a newer more secure digital certificate. Installs will require older version to be uninstalled from Windows Control Panle or drag to trash on Macs.
1/4/16: Release 2.40 (Minor)
Release 2.40 introduces GWE Lite mode for hobbyists.
1/2/16: Release 2.36 (Minor)
Release 2.36 is a minor release that adds shared Tool Cribs.
1/1/16: Release 2.35 (Minor)
Release 2.35 is a minor release that includes:
- Support for sharing machine profiles with GW Calculator and other GWE users in a shared folder.
- Fixed a bug that prevented creation of new tool tables.
- Fixed a hang bug for some canned cycle situations with Heidenhain ISO post.
- Fixed a bug were Carbide 3D Nomad profile showed lathe instead of mill Wizards.
- Fixed a metric bug in the OD Turning Wizard.
12/1/15: Release 2.32 (Minor)
Release 2.32 is a minor release that includes:
- Added many more Options to Conversational Wizard Options tab to make it easier to set them up for the requirements of different CNC Controls.
- Made code generated by Conversational CNC respect the options for how numbers are to be formatted under Setup Post Numbers.
- Conversational Wizards now suppress tool changes to the same tool number.
- Tool Selectors for Conversational CNC can now access the Tool Crib.
- Haas VF-10 Machine Profile. Press the Reset button to add it to your list. Reset won't overwrite any existing profiles, it just adds back whichever default profiles are missing.
- Made Conversational Wizards scroll when screen height is limited so they can be used on lower resolution screens.
- Fixed bugs in Surfacing Wizard not saving some of its parameters like S and F.
10/6/15: Release 2.30 (Mandatory Minor)
Release 2.30 is a minor release that includes:
- Added all the Conversational Lathe Wizard features to Mill Wizards so they have work offsets, tool changes, coolant, and so on.
- Made sure Conversational CNC Wizards always add a "." at end of numbers.
- Added more error checking to Conversational CNC Wizards.
- Added an "Options" tab to Conversational Wizards that gives more control over various kinds of formatting in the code generated by the Wizards. Options include the ability to use ";" instead of parenthesis for comments, ability to generate IJK format arcs instead of R, and the ability to add "N" numbers to each line after insertion.
- Added a feature to Find/Replace that allows it to be driven from a CSV (spreadsheet) file containing multiple find/replace operations. This makes it easy to do things like swap around a bunch of tool numbers.
- Fixed some bugs involving G68 (coordinate rotation) and arcs.
- Made Conversational CNC Wizards scrollable so they can still be used with low screen resolutions.
8/24/15: Release 2.23 (Minor)
Release 2.22 is a minor release focused on usability improvements motivated by customer feedback:
- Rewrote the Conversational CNC Slotting Wizard to fix some user reported bugs.
- Updated the Haas Mill post so it properly handles numbers without decimal points if the option to ignore number checking is turned off so the extra checking is done. See this blog post for more details.
8/18/15: Release 2.22 (Minor)
Release 2.22 is a minor release focused on usability improvements motivated by customer feedback:
- Added a "Rename" button for the Posts so you can rename them and keep track of different variations.
- Rewrote the UI for editing the list of holes in the Conversational Hole Wizard to make it easier to use.
- Reworked editing of number formats in the Post under "Post Numbers" to make it easier to use.
7/21/15: Release 2.20 (Minor)
Release 2.20 is a minor release focused on:
- Added "Export Hints..." command ot File Menu. Creates a CSV file that shows the following for every line of gcode: Line #, GCode text, .Time to reach that line, Acceleration adjusted time, XYZ at end of line execution, S and F at end of line execution, T at end of line execution, Hint, and Error.
- Fixed a bug in estimating run time for metric mode.
7/20/15: Release 2.16 (Silent)
Release 2.16 is a silent release focused on:
- An error check on the Conversational CNC ID Turning Wizard was wrong, asked for RapidX > StartX should be <.
- Fixed a bug in the FUP operator for Fanuc Macro B syntax.
- Fixed a bug in the macro variable insert Wizard that was assigning Z to local variable #27 instead of #26.
7/13/15: Release 2.15 (Minor)
Release 2.15 is a minor release focused on:
- Implemented Conversational CNC Mill Tapping Wizard.
7/3/15: Release 2.11 (Minor)
Release 2.11 is a minor release focused on:
- Implemented ID Turning and ID Taper Conversational CNC Wizards.
6/9/15: Release 2.09 (Minor)
Release 2.09 is a minor release focused on:
- Implemented Chamfer/Radius Conversational CNC Wizards
- Fixed a bug that would sometimes confuse Zoom Extents on Backplot.
- Added new machine profiles for Bridgeport Series I and Carbide3D Nomad.
- Implemented OD Taper Conversational CNC Wizard
- Fixed a bug in bolt circles for Conversational CNC Hole Wizard.
- Made canned cycles work with Polar Coordinates.
5/11/15: Release 2.05 (Minor)
Release 2.05 is a minor release focused on:
- Implemented Chamfer/Radius Wizards
- Reformatted and updated the Mill Wizard UI to be cleaner and more like lathes. Work offsets and tool changes are not yet implemented even though the UI is there.
- Added a Wizard home tab for lathes where you can see them all in iconic format.
- Fixed a bug that was causing the OD Turning Wizard not to do roughing passes.
- Fixed a bug in Radius Wizard that would sometimes mess up the finish pass.
5/6/15: Release 2.02 (Minor)
Release 2.02 is a minor release focused on:
- Added more tweaks to the FADAL post to improve it.
- Added code to remove garbage null (0) characters from the g-code. These confuse all kinds of software but will confuse GW Editor no more.
- Set up the subscription expired pop up to give you the URL link so you can renew more easily.
- Fixed a couple of bugs in the Grooving Wizard.
5/4/15: Release 2.00 (Minor)
Release 2.00 is a minor release that adds two new FADAL g-code features:
- "L" with a two-digit value can cause a line to repeat.
- "M30" as end of subroutines. This lets you define the subroutines at top of file and use an M30 to indicate where the definitions end and where the initial program execution should start.
4/28/15: Release 1.99 (Minor)
Release 1.99 is a minor release that addresses th following:
- Adds Conversational CNC Parting Wizard
- Fixes a bug where G94 feed mode was getting confused with the G94 Canned Facing Cycle for Fanuc and Haas lathes.
4/27/15: Release 1.98 (Minor)
Release 1.98 is a minor release that addresses th following:
- Adds a preliminary FADAL post that implements "E" syntax for work offsets, "L" syntax for subroutines, M17 subroutine return, and G5 non-modal rapids.
- Fixed a minor bug affecting backplot display of some arcs.
4/22/15: Release 1.95 (Minor)
Release 1.95 is a minor release that addresses th following:
- Adds Conversational CNC Lathe Grooving Wizard
- Fixed a bug in the Deep Hole Wizard that prevented full retract custom cycles from working properly.
- Fixed a bug in the Macro tab where macro variables were only being displayed with 1 digit of precision.
4/19/15: Release 1.92 (Minor)
Release 1.92 is a minor release that fixes screen layout problems for 1024x768 users in the new Conversational CNC Lathe Drilling Wizard.
4/18/15: Release 1.91 (Minor)
Release 1.91 is a minor release that adds:
- Conversational CNC Lathe Drilling Wizard.
- Fixed a problem with "Insert M-Code" button.
- Fixed a problem with how the backplot rendered certain helixes.
- Fixed a problem with the Mill Surfacing Wizard.
- Fixed a problem that prevented the GW Calculator integration with GW Editor from working when disconnected from the Internet.
4/13/15: Release 1.89 (Minor)
Release 1.89 is a minor release that adds the Conversational CNC Lathe OD Turning Wizard.
4/6/15: Release 1.88 (Minor)
Release 1.88 is a minor release focused on:
- Added Conversational CNC Lathe Facing Wizard.
- Fixed a bug in the LinuxCNC and Mach3 Lathe Posts. They were complaining about an unknown "Lathe.AllowLatheCornerRound" post variable.
4/2/15: Release 1.87 (Minor)
Release 1.87 is a minor release focused on Usability and Post Enhancements:
- Lots more Bubble Tips that give a screen tour, backplot manipulation, and debugger operation..
- Added support for Haas G70 Bolt Circle, G71 Bolt Arc, and G72 Bolt Line g-codes.
3/15/15: Release 1.85 (Minor Release)
Release 1.85 is a minor release focused on Usability Enhancements:
- Rolled out Start Wizard, Bubble Tips, and the Help Menu.
- Added support to Conversational Wizards to operate in negative quadrants for Part Zeros.
3/5/15: Release 1.84 (Beta Release)
Release 1.84 is a beta release focused on Usability Enhancements:
- Added Start Wizard
- Added Bubble Tips
- Added Help Menu
- Fixed some Tool tab bugs
- Fixed some Work Offset bugs
2/20/15: Release 1.82 (Silent Release)
Release 1.82 is a minor release:
- Added a test that issues an error if the same "O" word address is defined more than once.
- Fixed a bug in G51 scaling for Haas and Fanuc.
- Fixed a bug in calculating the overall extents of feed and rapid motions involving arcs.
2/19/15: Release 1.81 (Feathered Release)
Release 1.81 fixed a work offset bug introduced by 1.80.
2/18/15: Release 1.80 (Silent)
Release 1.80 is a fairly major overhaul of Work Offsets and #variables:
- Changed file format where non-volatile #vars are stored from XML to CSV to make it easier to access for end users.
- Marked the Haas G110..G129 work offsets on the Setup Post Variables 1..48 tab.
- Added additional information to the hint view that shows the XYZ work offset values when the offset is selected.
- Fixed all open bugs on these areas.
2/14/15: Release 1.77 (Silent)
Release 1.77 is focused on bug fixes for work offsets being used with #vars and subprograms.
2/2/15: Release 1.76 (Feathered)
Release 1.76 includes:
- More work on the Data Grids
- Changed User Club button on Login Bar to access QuestionX.
- Fixed a bug that was causing the startup script for Posts not to execute sometimes. The main symptom was that lathes were not coming up with G18 plane when this happened.
1/15/15: Release 1.75 (Silent)
Release 1.75 includes:
- Mocked up UI for most of the lathe conversational CNC wizards. Next step is to have them generate g-code.
- Had a bug were some lathe backplots were reversed, as though viewed from behind. Fixed that problem.
- Many of the Data Grids now have enhanced functionality so you can change the order of columns, hide columns, change column width, and change sort order and the system will remember these choices from one session to the next. This helps greatly with tables that have a lot of columns, such as the tool table. To invoke the feature, just click the mouse in the column header and popup to edit the columns will appear.
- Updated the spindle power curve so it can have as many points as you wish and it shows a snazzy graph of the curve as well.
- Fixed a slew of Localization problems when the decimal is something other than "."
- Fixed a few other user-reported problems and usability glitches in various places that aren't encountered very often.
10/28/14: Release 1.70 (Mandatory Upgrade)
Release 1.70 includes:
- Added features aimed at supporting large Tool Tables better. These include ability to search for tools in tables, the ability to filter tools by type in the Feeds and Speeds popup, and performance enhancements aimed at making very large tables perform better.
- Our code signing certificate is expiring, so this release has a migrational certificate plus a newly renewed certificate.
- A number of changes were made to improve the quality of the backplot display, particularly on Ortho views (non-Perspective) and when zooming in very closely on small details.
9/7/14: Release 1.67
Release 1.67 fixes a problem with operator preferences in Fanuc Macro B g-code. It also fixes a problem where Hint text wasn't wrapping. Lastly, it adds the new generation next release install code.
7/29/14: Release 1.65
Release 1.65 fixes panning problems with mouse in Top, Front, and Right views.
7/24/14: Release 1.64
Release 1.64 simplifies setup for new users. The default Machine Profiles are now all automatically tied to posts so you don't have to configure them unless you want a different post. Also improved the visual display of information while running in simulator mode.
7/8/14: Release 1.63
Release 1.63 is a minor bug fix release:
- Fixed several bugs to do with the ATAN g-code function.
- Fixed a bug on establishing the origin with G16 for Mach3 polar coordinate g-code programming.
- Did some minor performance optimization, probably not very noticeable.
- Fixed a problem with the Adjust Addresses Revision.
6/10/14: Release 1.62
Release 1.62 is a minor bug fix release:
- Had some reports all or part of the backplot was dropping out. Traced it to a problem with latest 3D graphics library. Dropped back to prior version to fix it.
- Peck amount is optional on Haas drilling cycles. Added a post variable Cycles.PeckRequired that determines whether the peck is required and updated the Haas post so it is not required.
- People were having a number of problems invoking functions during the simulator that should not be invoked. The UI now disables those functions on the toolbar to prevent the problem.
6/5/14: Release 1.61
Release 1.61 is a minor feature release that adds the ability to adjust time estimates based on the CNC machine's acceleration.
5/24/14: Release 1.59
Release 1.59 is a minor release that includes more 3D graphics library updates. This release places the background grid and backplot on two different layers so that the grid can't hide the backplot. Additional work includes:
- Fixed some bugs associated with zooming and panning the non-perspective views in the backplot.
- Fixed a bug that made the splitters for resizing the backplot area act very poorly, like they were going through syrup.
- Fixed some rounding errors in Conversational CNC Wizards.
- Fixed a bug that made it hard to suppress display of some error messages from the options on the Errors tab.
4/23/14: Release 1.57
Release 1.57 is an update to the 3D graphics library to the latest version: Away3D 416. This release is faster and uses less memory (particularly less memory while the simulation runs). In addition, the line thicknesses have been tweaked so they look better for metric users. A preliminary version of this update was Beta tested for a week and nobody reported any significant issues, so we're rolling it back into the mainstream.
4/12/14: Release 1.55
Release 1.55 is a minor bug fix release focused on some metric conversion bugs in the Hints and some backplot visibility issues for lathes.
4/3/14: Release 1.54
Release 1.54 is a minor bug fix release:
- Fixes bugs related to non-perspective views where the backplot and background grid could disappear sometimes.
- Fixes a bug where grid and plot lines could grow freakishly large in metric.
- Fixes a rounding problem when Macro Variables like #101 were displayed.
- Added a "Save Close" button to Setup to improve usability.
3/31/14: Release 1.53
Release 1.53 fixes a bug where the backplot and background grid could disappear sometimes. Also, pressing Zoom Extents while no g-code is loaded will restore the default view.
3/17/14: Release 1.52
Release 1.52 is a minor release that adds a Multicam CNC Router post together with a new set of post variables that allow axis direction to be switched (Multicam Z is reversed). The variables are called "AxisOptions.xMult/yMult/zMult". For Multicam, zMult is -1.0. For most other posts these are all set to 1.0.
3/10/14: Release 1.51
Release 1.51 is a silent release that switches the non-perspective views to an orthographic projection instead of a perspective projection. Looking for feedback on whether this is an improvement.
3/4/14: Release 1.50
Release 1.50 fixes a problem with the File Compare that was causing it to show HTML tags improperly in the righthand pane.
2/18/14: Release 1.48
Release 1.48 is a minor release focused on customer feedback and bug fixes:
- Added new Help pages for Editor Setup, Simulator, and Revisions.
- Fixed several problems where the text prompts were the same color as the background making them invisible.
- Fixed some bugs with canned cycle repeat using "K" or "L" words.
- The Tool Crib was confusing for lathe users. If you switched to a lathe machine, then went straight to the Tool Crib, you couldn't see what machine was selected. If it was a mill, customers wondered why they couldn't select lathe tooling. The answer is to select or create a Crib that is associated with a Lathe rather than a Mill and add tools there. This UI change just makes it more obvious.
2/9/14: Release 1.47
Release 1.47 is a minor release:
- Changed so all tools are automatically made visible at startup. Had people turn off tool visibility, quit, come back later, and wonder why the tools weren't visible in the backplot.
- Add a "My Post Isn't Here!" button to Setup.
- Fixed problem that prevented setting color of tool in backplot.
- Fixed some problems saving spindle power curve parameters on the machine profile.
- Added the ability to put a hole at a specific XY in the Conversational Hole Wizard. This saves some steps over using the Grid layout to do it.
1/29/14: Release 1.45
Release 1.45 is a minor release that adds the Rectangular and Round Boss Wizards to the Conversational CNC Wizard feature.
1/23/14: Release 1.42
Release 1.42 is a minor release:
- Boss Wizard UI is mocked up and Rectangular Boss Wizard is partially implemented.
- Added a stepover parameter to the Rectangular Pocket Wizard.
- Fixed a number of issues to do with editing and modifying g- and m-codes for the Post.
1/12/14: Release 1.41
Release 1.41 is a minor bug fix release:
- Fixed problems with selecting round vs rectangular pockets on CADCAM Wizards.
- Fixed problem with text color on Tool Crib Tool Editor.
- Fixed problem with text color when editing the file extensions on Tools Options popup.
1/10/14: Release 1.39
Release 1.3 is a minor bug fix release:
- Fixed problems with Insert on CADCAM Wizards.
- Fixed problem with Translate Revision.
Changes Older than 1/1/2014