Machinists need a second opinion on part programs. G-Code isn't exactly English, after all. Sometimes g-code programs have bugs that are hard to see without a little help.
So we built the dream g-code viewer:
- It knows your controller using a "post" just like your CAM program.
- It has a sophisticated graphical backplot and simulator so you can view your g-code toolpaths.
- It does in depth error checking and includes a special "Hints" view that tells you everything about each block to give you even more information about what your part program is doing.
- There's even a set of Wizards to streamline insertion of new g-codes, and there's full integration with our powerful G-Wizard Machinist's Calculator so you can edit your program.
Whether you're a g-code expert, or just getting started learning the g-codes, GWE has capabilities for every skill level and it will make a better, faster g-code programmer out of any machinist.
View. Simulate. Edit. Revise. Debug. Power to the Machinist!
Check it out. We know you'll like GWE, the G-Wizard G-Code Editor and G-Code Viewer.
Note: Even if you registered for calculator, you still need to register for the Editor Beta!
We value your privacy, we do not spam, sell, or share your information.
But, we need a working email to activate your software!
G-Wizard G-Code Viewer and Editor (GWE for short)...
Silky Smooth G-Code Viewer, Backplot and Simulator
GWE G-Code Viewer, Backplot and Simulator...
- Multiple views including Top, Front, Right, and Perspective, just like your CAD/CAM program
- Simulated 3D toolholder makes the action come alive
- Plots the toolpath motions so you can view just what your g-code is doing
- Panning, zooming, and rotation
- Playback in the simulator with the familiar Cycle Start, Feedhold, Single Block, and Rewind commands
- Variable playback speed from 0 - 100%. Move quickly to get to the part that's interesting and then slow it down to understand what's happening
- Graphical backplot viewer animates during playback so you can keep track of where you are
- Detailed feedback of coordinates, spindle rpm, feedrate, and coolant status during playback, just like on your CNC machine
- Detailed feedback of g-code modes at each step during playback, such as whether G17, G18, or G19 plane is selected
- Work offsets G54-59 all the way through extended work offsets G54.1 P1 - P300
- G52 Local Work Shift
- G92 Coordinate System Setting
- G51 Coordinate Scaling
Everything you need to verify your g-code part program is doing the right thing is right there when you need it.
See All of G-Wizard Editor's Features